This collection consists of the corporate records of the Curtiss-Wright Corporation. Included in the collection are technical and engineering reports of Curtiss-Wright Airplane Division's operations in St. Louis (Robertson), MO (1935-1945) and Buffalo, NY, (1932-1945), as well as AAS Material Division and AAF Air Technical Services Command memorandum reports collected by Curtiss-Wright's St. Louis and Buffalo technical reference libraries. The collection also contains the files of Curtiss-Wright's Patent Department, which hold records of patents filed by Curtiss-Wright and patent-infringement cases involving Curtiss-Wright. Also included in the collection are specifications issued by and photos commissioned by the Keystone Aircraft Corporation (Huff-Daland Airplanes, Inc. until March 1927), which had been acquired by Wright in 1928 along with Loening Aeronautical Engineering Corp., and formed the Keystone Division of Curtiss-Wright until 1932 when Keystone's Bristol, PA factory closed its doors. The collection also contains financial records of the Curtiss-Wright Airports Corporation, which was liquidated in 1936, as well as an extensive negative collection featuring Curtiss-Wright aircraft from the 1930s and 1940s, concentrated especially on the war years.
Scope and Contents:
The Curtiss-Wright Corporation Records collection contains approximately 212 cubic feet of material. The collection contains the following material:
Army Air Service Material Division & Army Air Force Technical Services Command Memo
Reports & Technical Reports which include testing of various Curtiss-Wright models of aircraft and/or various parts of aircraft
Technical & Engineering Reports from the St. Louis, MO plant [Robertson] & Buffalo, NY plant
Patents, Patent Dockets, Patent Serial numbers, Suits, License Agreements, Patents filed by Curtiss-Wright & Patent Infringement Cases [1800s to 1940s]
Miscellaneous Research Files
Corporate & Financial Records [1923 to 1972]
Correspondence
Blueprint Drawings
Advertisements from Newspapers & Magazines in Scrapbooks
Engine Decals
Photographs
Negatives & Glass Plates
Arrangement:
This collection was arranged into Series and Subseries:
Subseries I: Air Corps Materiel Division, Reports [ACMR]
Subseries II: Buffalo Reports
Subseries III: St. Louis
Series III: Glass Format Photography
Series IV: 1969 Accretion - Listing of Archival Material
Series V: Master Print Books [this part of the collection has not been processed]
Historical note:
An historic event in aviation occurred on June 26, 1929 when two major aircraft companies: the Curtiss Aeroplane and Motor Company merged with the Wright Aeronautical Corporation to form the Curtiss-Wright Corporation. After this merger, the former Wright organization took over all of the engine and propeller manufacture while Curtiss concentrated on airplanes. This merger was completed by organizing two major divisions under their original names, but under the direction of a corporate headquarters located in New York City. However, there was a recognized separation of spirit as well as specialized facilities that was never completely resolved in succeeding years. The election of former Wright personnel to key corporate positions soon led to Wright becoming the dominant division. At the height of the Lindbergh Boom during the 1920s and 1930s, the Curtiss-Wright Corporation was made up of the following identified organizations: The Curtiss Aeroplane & Motor Company; The Curtiss-Caproni Corporation; The Curtiss-Robertson Airplane Manufacturing Company; The Keystone Aircraft Corporation; The Moth Aircraft Corporation; The Travel Air Manufacturing Company; The Wright Aeronautical Corporation; Curtiss-Wright Flying Service; The Curtiss-Wright Sales
Corporation; The Curtiss-Wright Export Corporation. Curtiss-Wright was quickly becoming the 'General Motors of the Air' until the great depression in October 1929. Sales dropped and Curtiss-Wright was forced to close certain satellite plants and transfer some of their product lines to the St. Louis facility. It looked like even the Buffalo plants would also have to close when Curtiss-Wright received an order from Colombia, South America for Hawks and Falcons. This was the largest military order to Curtiss since the war. The Colombia sale saved the Curtiss-Wright organization at this low point in its history. This order kept the production lines going until new military and civil markets began to open up as the depression waned and the build-up for World War II began. During the U.S. military build-up prior to the attack on Pearl Harbor, all existing Curtiss-Wright plants were expanded and new aircraft factories were built at Columbus, Ohio and Louisville, Kentucky. The dropping of the two atomic bombs on Japan resulted in an unexpected early end to World War II. All of the major U.S. airplane builders including Curtiss-Wright were hit by massive contract cancellations because of the Japanese surrender. In 1946 Curtiss-Wright had only two experimental military models at hand for postwar delivery and no assurance of production orders. Curtiss-Wright was forced to shut down all airplane plants and transfer all units of the Aeroplane Division to their Columbus Plant. The eventual sale of the Airplane Division to North American included design rights to the former Curtiss-Wright airplanes. The Curtiss-Wright Airplane Division, which manufactured airframes, finally closed down in 1951.
Provenance:
Curtiss-Wright Corporation, gift, XXXX, 1969
Restrictions:
No restrictions on access.
Rights:
Material is subject to Smithsonian Terms of Use. Should you wish to use NASM material in any medium, please submit an Application for Permission to Reproduce NASM Material, available at Permissions Requests.
Lindbergh, Charles A. (Charles Augustus), 1902-1974 Search this
Extent:
.23 Cubic feet ((1 box))
Type:
Collection descriptions
Archival materials
Transcripts
Audiocassettes
Date:
1967
Summary:
Reproduction recording of an interview in April 1967 with Donald A. Hall, an engineer and designer of the Ryan NYP Spirit of St. Louis.
Scope and Contents:
This collection consists of an audio reproduction recording on cassette tape of an interview conducted by telephone with Donald A. Hall in 1967. The interviewer is Thomas Leech who was working on behalf of the San Diego Section of the American Institute of Aeronautics and Astronautics (AIAA). During the interview, Hall discusses his career, working with Charles Augustus Lindbergh, the design of the Ryan NYP Spirit of St. Louis, reaction to Lindbergh's New York to Paris flight, his involvement with AIAA, and his family.
Additionally, this collection contains an abridged transcript prepared by Thomas Leech in 2003 and a photocopy of the May 1967 issue of The AIAA Tabloid featuring an article on Donald A. Hall.
Also on the reverse side of the cassette tape is a recording of a speech by C. Northcote Parkinson to the General Dynamics Convair Management Club, circa 1968.
Biographical / Historical:
Donald A. Hall was an engineer who is best known as the designer of the Ryan NYP Spirit of St. Louis. Hall was born in Brooklyn, New York in 1898. In 1917, Hall graduated from the Pratt Institute with a certificate in mechanical engineering. Hall worked for Curtiss Aeroplane and Motor Company beginning in 1919 before going to Douglas Aircraft in 1924. Hall later accepted the job of chief, and only full-time, engineer at Ryan Airlines where he started on January 31, 1927. A telegram arrived four days later asking if Ryan could build an airplane capable of flying nonstop from New York to Paris, France. Hall reviewed the request and replied affirmatively and on February 21, 1927, Charles Augustus Lindbergh arrived at Ryan to discuss the aircraft. After reviewing Hall's preliminary design work, a contract was finalized between Ryan and Lindbergh on February 25, 1927. The aircraft Hall designed, the Ryan NYP Spirit of St. Louis was built and ready for flight testing on April 28, 1927, a process that took place in under two weeks. On May 21, 1927, Lindbergh completed the first solo nonstop transatlantic flight in history flying in the Spirit of St. Louis.
Later, Hall designed the Ryan X-1 Doodle Bug (Mahoney-Ryan Special). After Ryan relocated to St. Louis, Missouri, Hall stayed in San Diego, California and founded his own company, Hall Aeronautical Development Company. After the Great Depression hit, Hall was forced to close his company due to financial concerns and went to work for Consolidated in 1936. During his time with the company, Hall worked as a consultant to I. M. Laddon on the design of the Consolidated B-24 Liberator. In 1949, Hall went to work for the U.S. Navy at Naval Air Station North Island where he was an engineer before being promoted to head of the helicopter branch and later head of the structures branch before retiring in 1963. Donald A. Hall died in 1968.
Provenance:
Thomas Leech, Gift, 2010, NASM.2010.0039
Restrictions:
No restrictions on access.
Rights:
Material is subject to Smithsonian Terms of Use. Should you wish to use NASM material in any medium, please submit an Application for Permission to Reproduce NASM Material, available at Permissions Requests
This collection consists of reports on the design, construction, and testing of the NC series flying boats and photographs of NC-4's construction and transatlantic flight.
Scope and Contents:
This collection consists of reports on the design, construction, and testing of the NC series flying boats and photographs and 3 negatives of the NC-4's construction and transatlantic flight. The collection is set up in a series of books with two copies of each book, except books 11 and 13. There is some water damage to book 10. Due to the fact that book 5 contained oversize materials, both copies of this book are filed out of sequence in box 4.
Arrangement:
The collection is set up in a series of books with two copies of each book, except books 11 and 13. There is some water damage to book 10. Due to the fact that book 5 contained oversize materials, both copies of this book are filed out of sequence in box 4.
Biographical/Historical note:
In 1917, during World War I, the United States Navy sent out specification for a flying boat of sufficient range to cross the Atlantic Ocean by air to Great Britain, where it would serve as an anti-submarine patrol aircraft. The Curtiss Aeroplane and Motor Company, in conjunction with the United States Navy, developed a three-engine aircraft to meet these specifications. The first of the new aircraft was the NC-1 that flew for the first time on October 4, 1918. This was followed by the NC-2 whose maiden flight took place on April 12, 1919 with four engines in tandem pairs. The engine arrangement of the NC-2 had been declared unsatisfactory for the mission and the wings were removed and installed on the NC-1 to replace the originals that had been damaged in a storm. By this time, World War I had ended, but the Navy decided to continue the program in an effort to make the first transatlantic flight crossing by air. The new NC-3 and NC-4 models reverted to the three-engine format, although the NC-4 had a fourth engine mounted as a pusher behind the center engine. On May 16, 1919 the NC-1, NC-3 and NC-4 assembled at Trepassy Bay, Newfoundland, under the command of Commander John H. Towers, to begin the 1400-mile flight to the Azores. The NC-1 was forced down short of the island and sank. Naval vessels stationed along the flight path rescued the crew of the NC-1. The NC-3 landed two hundred miles short and taxied the remaining distance to the island. Only the NC-4 completed the flight successfully, reaching Plymouth, England, via Lisbon, Portugal, on May 31, 1919. Following publicity tours of the Atlantic and Gulf coasts of the United States, the Curtiss NC-4 was given over to the Smithsonian Institution and is now part of the National Air and Space Museum collection.
Provenance:
Lee Pearson, XXXX-0422, Unknown.
Restrictions:
No restrictions on access.
Rights:
Material is subject to Smithsonian Terms of Use. Should you wish to use NASM material in any medium, please submit an Application for Permission to Reproduce NASM Material, available at Permissions Requests.
The 50th Anniversary of the NC-4 Transatlantic Flight Collection [Smith] Collection contains photocopies of correspondence, published materials, maps, and photographs. The collection also includes photocopies of aircraft logs, naval ship logs, weather reports, progress reports, biographies of the participants, information on the construction of the NC Aircraft and the general planning for the flight, and original material on the thirtieth and fiftieth anniversaries of the flight.
Scope and Content Note:
This collection was gathered by Dr. Richard K. Smith of the National Air and Space Museum, in preparation for the fiftieth anniversary of the NC-4's transatlantic flight. It contains photocopies from microfilm of documents found in the National Archives and Records Administration (NARA) Record Group 24, Records of the Bureau of Naval Personnel, and Record Group 72, Records of the Bureau of Aeronautics. The researcher will find photocopies of correspondence, published materials, maps, and photographs. The collection also includes photocopies of aircraft logs, naval ship logs, weather reports, progress reports, biographies of the participants, information on the construction of the NC Aircraft and general planning for the flight, and original material on the thirtieth and fiftieth anniversaries of the flight.
The final box of the collection (Box 5) contains 6 reels of microfilm from the National Archives and Records Administration (NARA) Record Groups 24 and 72 relating to the Trans Atlantic flight of the NC-4. As the processing archivist reviewed the microfilm, it appeared that many of the documents in boxes 1-4 were copied from the microfilm. These reels of microfilm are available for review upon request.
Arrangement:
Materials are arranged by subject and then chronologically.
Historical Note:
In 1917, the United States Navy developed specifications for a flying boat of sufficient range to cross the Atlantic to England. The Curtiss Aeroplane and Motor Company, in conjunction with the Navy, developed a three-engine aircraft. The Navy intended that the flying boat would serve as an anti-submarine patrol aircraft. The first of the new aircraft, the NC-1, flew on October 4, 1918, followed by the NC-2 on April 12, 1919. Even though World War I had ended, the Navy decided to continue the program in an effort to make the first transatlantic crossing by air. As the program progressed, the NC-2 was dismantled for parts for the other NC aircraft. On May 16, 1919, the NC-1, the NC-3, and the NC-4 assembled at Trepassey Bay, Newfoundland, to begin the 1200 nautical-mile flight to the Azores. The NC-1 was forced down short of the islands and sank, but the Greek vessel, Ionia, rescued the crew. The NC-3 landed two hundred miles short and taxied the remaining distance to the islands. The NC-4 completed the flight successfully, reaching Plymouth, England via Lisbon, Portugal, on May 31, 1919. Following publicity tours of the Atlantic and Gulf coasts of the United States, the NC-4 was given to the Smithsonian Institution and is a part of the National Air and Space Museum collection.
Reels of microfilm are available for review upon request.
Rights:
Material is subject to Smithsonian Terms of Use. Should you wish to ue NASM material in any medium, please submit an Application for Permission to Reproduce NASM Material, available at Permissions Requests.
The years before World War I were spent in patent litigation for aviation pioneers Glenn Curtiss and Orville and Wilbur Wright.
Scope and Contents:
The Curtiss-Wright Corporation Archives - Patent Files collection consists primarily of materials relating to patents issued to and maintained by the Curtiss-Wright Corporation and its subsidiaries from the 1910s to the 1950s, though the bulk of the materials pre-date World War II. The majority of the collection is original patent certificates. Other materials include records of litigation proceedings, correspondence, memoranda, aircraft drawings and blueprints, reports, sales brochures, meeting minutes, and annual reports.
Arrangement:
The collection is arranged in four series: Patents, Patent File Wrappers, Patent Litigation, and Curtiss-Wright Corporation Records. Series I contains original patents and related materials issued or assigned to the Curtiss-Wright Corporation and related organizations. Covering the years between 1911 and 1939, the series is further divided into two subseries: United States Patents and International Patents. Series II consists of file wrappers prepared by the United States Patent Office, containing a complete record of the patent's history. The third series includes materials from Curtiss-Wright's numerous litigation proceedings in defense of its patents. The fourth series contains business records created by the Curtiss-Wright Corporation including photocopies of historic patent and stock documents, division minutes, and reports for the U.S. Navy Department.
Series I - Patents, 1911-1939
Subseries I - United States Patents, 1911-1939
Subseries II - International Patents, 1916-1935
Series II - Patent File Wrappers, 1916-1930
Series III - Patent Litigation, 1916-1947
Series IV - Curtiss-Wright Corporation Records, 1906-1945
Historical Note:
The years before World War I were spent in patent litigation for aviation pioneers Glenn Curtiss and Orville and Wilbur Wright. The Wright brothers claimed wing warping patents and sought to prevent Curtiss and others from manufacturing and selling aircraft and products based on these patents. During World War I, the aircraft manufacturing industry set up the Manufacturer's Aircraft Association, a patent pool in which all participants were allowed to use any patents to build aircraft for the war effort. After the war, Wright Aeronautical Corporation and the Curtiss Aeroplane and Motor Company continued to be major players in the aircraft industry, long after Curtiss and the Wrights ended association with their namesakes.
In 1929, the Curtiss Aeroplane and Motor Company merged with the Wright Aeronautical Corporation to form the Curtiss-Wright Corporation. After the merger, responsibility for engine and propeller manufacture was consolidated under the Wright name while Curtiss concentrated on airplanes. Although the two companies were merged by name and under the direction of a corporate headquarters located in New York City, the separation and specialization of the two divisions continued to cause problems for the company. The election of former Wright personnel to key corporate positions soon led to Wright becoming the dominant division. The Great Depression and the collapse of the market for commercial aviation revealed how reliant the aviation industry was on military production. Sales dropped and Curtiss-Wright was forced to close certain satellite plants and transfer some of their product lines to the St. Louis facility.
During the U.S. military build-up prior to World War II, existing Curtiss-Wright plants were expanded and new aircraft factories were built to meet the growing production demand. The company failed, however, to plan for the future after the war. In 1946, Curtiss-Wright had only two experimental military models at hand for postwar delivery and no assurance of production orders. Wright Aeronautical continued to build engines, but was no longer at the forefront of development. The eventual sale of the Airplane Division to North American included design rights to the former Curtiss-Wright airplanes. The Curtiss-Wright Airplane Division, which manufactured airframes, finally closed down in 1951.
The Curtiss-Wright Corporation still exists in the 21st century, but has become a diversified technology corporation in various markets, including aviation and defense.
Provenance:
Curtiss-Wright Corporation, gift, 1987.
Restrictions:
No restrictions on access.
Rights:
Material is subject to Smithsonian Terms of Use. Should you wish to use NASM material in any medium, please submit an Application for Permission to Reproduce NASM Material, available at Permissions Requests.
Material is subject to Smithsonian Terms of Use. Should you wish to use NASM material in any medium, please submit an Application for Permission to Reproduce NASM Material, available at Permissions Requests.
